F-150 EcoBoost 2.7L Product Development Turbo Upgrade 37mm, 40mm, 41mm

This week at CR Performance Engineering we completed our prototype set of F-150 2.7L (2015+) EcoBoost turbochargers.

This set is a Stage 3 prototype 41mm inducer (Pictured) however we will also offer a more moderate high performing upgrade 37mm set.

Prototype 41mm Inducer F150 2.7L Turbochargers

Prototype 41mm F150 2.7L Turbocharger

 

Stock F150 2.7L Turbocharger for Reference

In House Maching of Profiles

 

 

 

We are now pleased to offer the following Stage 1, Stage 2, Stage 3 upgrades.

Stage 1,2 or 3 is priced at $999.00 USD + Return Shipping for the upgrade of your turbochargers sent to us.

~$1980 USD a set + Shipping + (525 USD Refundable Core Charge). (2018 is an additional 500 USD for new Cores)
(Please be patient were a small operation and will respond as fast as we can to demand.)

 

F150 2.7L 2015-2017

Stage 1 ( 36.7mm Inducer / 51mm Exducer Upgrade, with a 52 trim )
-A great upgrade from stock at 34.7mm inducer size.

– Built to order, we purchase a brand new Ford OEM set of Cores and machine them OR send us your turbos for Upgrade and we will install new journal and thrust bearings
– High Performance CR Billet Compressor Wheel
– In house machined
– In house fully balanced
– Increased flow with standard gasoline use surge margin
– Great spool time for performance applications

Stage 2 ( 40.5mm Inducer / 56 mm Exducer Upgrade, 52 trim )
In development and available upon request

– Built to order, we purchase a brand new Ford OEM set of Cores and machine them OR send us your turbos for Upgrade and we will install new journal and thrust bearings
– High Performance CR Billet Compressor Wheel
– In house machined
– In house fully balanced
– Increased flow and standard gasoline use surge margin
– Great spool time for performance applications

Stage 3 (41mm Inducer / 51mm Exducer Upgrade, with a 65 trim)
BCB Tested 418 RWHP on 93 or 509 RWHP with E50 Blend

– Built to order, we purchase a brand new Ford OEM set of Cores and machine them OR send us your turbos for Upgrade and we will install new journal and thrust bearings
– In house machined
– In house fully balanced
– High Performance CR Billet Compressor Wheel
– Massive Increase in flow with “performance use” surge margin
– Great spool time for its flow ability

~1-4 Week build time on depending on variant you order.

Complete custom profile and billet wheels available a with development fee.

 

We Purchase good condition cores at 300 USD or 400 CAD, Sets only!

 

Email us to confirm pricing and place a order today.

 

3 thoughts on “F-150 EcoBoost 2.7L Product Development Turbo Upgrade 37mm, 40mm, 41mm

  1. Morris Silverstein says:

    I’m very interested in purchasing a stage 2 or 3 turbo upgrade. I’m assuming a dyno tune will be needed after installing. I wish a also plumb In a water/alcohol injection system to help with the extra boost as well as upgraded 3 inch down tubes and exhaust. I’ve also heard with the extra boost cylinder pressure installing high output ignition coils manage the spark better.

  2. Ethan says:

    If I send in my 2.7 ecoboost turbos and get them rebuilt with the stage 1 how much would that cost and what’s turn around time?

Leave a Reply to Morris Silverstein Cancel reply

Your email address will not be published. Required fields are marked *