2017-2020 Raptor 3.5L Ecoboost Full Bore Upgrade Manifold Set

Full Bore Performance Manifolds for the Ford Raptor EcoBoost 3.5L

Unleash your Raptors Full Potential with our Full Bore 3.5L V6 EcoBoost Performance Manifolds

More Photos

– High performance larger runners provide 30% more flow area over stock with no restriction throughout the RPM range
– Ready to support over 850 HP of flow (Dyno Proven on E85)

– 3-5 lbs/min flow increase typical on performance use, further gains with upgraded turbos
– Quicker spool times
– Removes restriction of cylinders with efficient D porting geometry
– Port matched to turbocharger turbine housing (Unlike OEM Manifolds)
– Thick wall durable High Sil Steel resists warping without cracking
– Dyno proven gains on completely stock truck with no tune of 23 RWHP 32 RW lb-ft peak with massive area under the curve at 368 RWHP & 428 ft-lbs
– Users can expect exponential further gains when matched with other performance products pushing flow past the stock manifold abilities or in combination with custom tuning
– Users can expect ~1 MPG fuel savings with improved manifold port geometry

Dyno Proven, Highest Flowing Manifold Set on the market, Bar None.

Note: Requires CRP Spacers if used in combination with Garrett PowerMax Stage 2 (901654-5001W & 901655-5001W) OR Some clearance modifications are needed to mount those turbos. These manifolds ports are massive so a spacer is required.

Applications:

2017           FORD F150 3.5L
2018-2020  FORD F150 3.5L
2017-2020  FORD Raptor 3.5L
2018-2020  FORD Expedition 3.5L

Ford OEM Manifold Numbers: 

HL3Z-9431-A, JL3Z-9431-C, JL7Z-9431-C, HL7Z-9431-A

HL3Z-9430-A, JL3Z-9430-C, JL7Z-9430-B, HL7Z-9430-A

Included In The Kit:   

– 1 x    Performance Drivers Side Manifold

– 1 x    Performance Passenger Side Manifold

– 16 x  W712244-S300 / W719078-S900  – Manifold Stud F150 3.5L

– 16 x  W701706-S440 – Grade 10 Locking Manifold Nut

– 1 x    Install Manual

OEM Gaskets & Hardware Required:

1x HL7Z-9448-B 2017-2020 DS F150 3.5L Manifold Gasket (L / DS)
1x HL7Z-9448-A 2011-2020 PS F150 3.5L Manifold Gasket (R / PS)

2x HL3Z-9T516-A 2017+ F150 3.5L Turbocharger Oil Inlet Feed Seal
2x FT4Z-6N652-E 2017+ F150 3.5L Turbocharger Oil Drain Seal #1
2x HL3Z-00815-A 2017+ F150 3.5L Turbocharger Oil Drain Seal #2

6x FT4Z-6N652-D 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #1
4x HL3Z-6N652-A 2017+ F150 3.5L Water Inlet & Outlet Tube Seal #2

6x W715673-S900 2017+ Turbocharger Mounting Bolt F150 3.5L & Raptor
4x W520514-S440 2017+ Downpipe Nut F150 3.5L (Recommended)

( The following only required if the Downpipe adaptor is separated / New turbochargers are installed )
2x BL3Z-9450-A 2017+ F150 3.5L Down Pipe Gasket
4x W716667-S900 2017+ Downpipe Stud F150 3.5L

2017 F150 & RAPTOR REQUIREMENTS

1x HL3Z-9448-C 2017 F150 3.5L Turbo Turbine Inlet Gasket (L / DS)
1x HL3Z-9450-A 2017 F150 3.5L Turbo Turbine Inlet Gasket (R / PS)

2018-2020 F150 & RAPTOR REQUIREMENTS

2x JL3Z-9450-A 2018+ F150 3.5L Turbo Turbine Inlet Gasket (L / DS) & (R / PS)

Install Manual Link

Proudly Designed, Cast and Machined 100% in North America