CR Performance Fully Balanced Rotating Assemblies for the Ford F-150 3.5L EcoBoost 2013-2016
This is our series of “Good To Go Kits” as the Balancing is done, no need to take parts to your local shop. Do it right and do it at home or your service shop.
Application: 2013-2016 F-150 F150 3.5L (Not compatible with 2011-12, Please see our 2011-12 Option)
Turbo Model: FoMoCo DL3E-6C879-AD & DL3E-6K682-AD & 2013-2016 Variants (2017 / 2018 Coming Soon)
Blades: 6+6 (1x Forward Rotation 1x Reverse Rotation)
Inducer: 36.7mm
Exducer: Base 50.8mm Extended Tip 53.8mm
Blade Height: 21.51mm (OEM is Only 17.8mm!)
Bore: 4.61mm Thr
The included Compressor wheels offer the following advanced features.
Modern Extended Tip Technology – Increasing capable boost pressures and increasing surge margin, therefore reducing surge. Provides improved throttle response and a boost increase at equivalent turbo RPM.
High Flow Design – Slim hub/nose design and advanced blade design provides a higher flow at compressor choke and through the entire operating range. Higher blade heights give proven higher performance.
Fast Spool Times – Weighing in at 28 grams these compressor wheels are ready to spool fast.
Stock Housing Fitment – No compressor housing modifications required.
Higher Performance Modern Design – Out performs stock with a larger extended tip exducer and higher blade height over stock.
This kit comes with a set of both Left Side and Right Side Fully Balanced Assemblies and Upgrade Billet Wheels along with all the rebuild components shown. All internal hardware needed for a full rebuild is included.
No need for a balancer as we fully balance and mark the assemblies with our digital balancer. Just install and torque / aligning the marks. (Balance Reports are available upon request, please just inquire immediately after payment.)
Save big over purchasing a new turbo set from Ford and rebuild it right at home or at your shop for a customer. All our Assemblies are fully balanced using our digital balance machine and marked for maximum longevity and performance.
Please read our policy before you make a purchase. By purchasing this item you agree with our policy noted on our FAQ page
Matthys Pischke (verified owner) –
Beautiful kit! Everything you need to rebuild the internals of your stock turbos.
It definitely requires a good amount of time and effort to remove the turbos and get them rebuilt. If you live anywhere that corrosion is an issue be ready for a struggle to remove the exhaust manifold bolts & exhaust downpipe flange. Liberal application of penetrating fluids and heat helped me avoid breaking any bolts.
The rebuild is relatively simple for a quality mechanic or DIY enthusiast with access to a well stocked shop and a high level of turbo knowledge.
Be aware, there is almost no information available to the DIY crowd on the internals of these turbos. You must have experience rebuilding components and pay close attention when disassembling.
All said and done this is a high quality kit that not only rebuilds your stock turbos if the bearings are on their way out but adds a nice bit of bonus power and throttle response. Highly recommend