GM Duramax LB7 6.6L Rebuild Kit & Upgrade Billet Compressor Wheel 2001-2004

CR Performance Fully Balanced Rotating Assembly for the GMC / Chevy Duramax LB7 6.6L IHI RHG6

This is our series of “Good To Go Kits” as the Balancing is done, no need to take parts to your local shop. Do it right and do it at home or your service shop.

Application: 2001-2004 GMC / Chevy Duramax LB7 6.6L

Turbo Model: IHI RHG6 (This does not fit the Garrett Turbos)

Blades: 11

Inducer: 60.6mm

Exducer: Base 82mm Extended Tip 87.3mm

Blade Height: 35.5mm

Bore: 7.7mm Thr

The included Compressor wheels offer the following advanced features.

Modern Extended Tip Technology – Increasing capable boost pressures and increasing surge margin, therefore reducing surge. Provides improved throttle response and a boost increase at equivalent turbo RPM.

High Flow Design – Slim hub/nose design and advanced blade design provides a higher flow at compressor choke and through the entire operating range. Higher blade heights give proven higher performance.

Fast Spool Times – Weighing in at 115 grams this compressor wheel is ready to spool fast.

Stock Housing Fitment – No compressor housing modifications required.

Higher Performance Modern Design – Out performs stock with a larger extended tip exducer and higher blade height over stock.

This kit comes with a Fully Balanced Assemblies with Upgrade Billet Wheel along with all the rebuild components shown. All internal hardware needed for a full rebuild is included.

No need for a balancer as we fully balance and mark the assemblies with our digital balancer. Just install and torque / aligning the marks. (Balance Reports are available upon request, please just inquire immediately after payment.)

Save big over purchasing a new turbo and rebuild it right at home or at your shop for a customer. All our Assemblies are fully balanced using our digital balance machine and marked for maximum longevity and performance.

The Included Rebuild Kit comes with the following

-360 Degree Thrust Bearing (2 piece)

-4 x Thrust Bearing Screws

-Thrust Collar

-Thrust Spacer

-2 x Journal Bearings

-Turbine End Piston Ring

-Compressor End Piston Ring

-4 x Journal Retaining Ring

-Compressor Lock Nut

– Backing Plate Gasket / O Ring

– Comp Cover O ring

– 3x Backing Plate Bolts and Seals

– 3x VGT actuator Seals

– Frost Plug

Interchange Part Number: 2911101100 97720748 97720749 897307711 8971884546 8973077111 2905769000 8977207488 8971884545 8972541603 8972541602 8972541601 97254160

Please read our policy before you make a purchase. By purchasing this item you agree with our policy noted on our FAQ page